 |
ELECTRONIC
WRENCHES |
A Comprehensive range of micro processor controlled Electronic Torque Tools that provides the optimum combination of accuracy and versatility.
ETW Electronic Memory Torque Wrenches
DTW Digital Electronic Torque Wrenches
ETW and DETS Display and Controls
• Highly accurate to cope with the demands of modern fastener technology.
• Simple to use in both L/H and R/H operation.
• Modern ergonomic design to enable ease of access and use.
• Simple setting of torque values with full unit conversion in ISO/Metric/lmperial units.
• Ideal for use with a PC or standard SPC packages.
• Easy to read LCD readout unit.
• Audible and visual alarms signal approach and achievement of preset torque values.
• Low battery and torque overload alarms.
• All models fitted with rechargeable Nickel Cadmiurn batteries.
• Auto power down when not in use.
• Self test and auto zero on power up.
• The package comes complete with battery charger, interface cable and software where applicable.
ETW Electronic Memory Torque Wrenches
| Model | Ordering Code | Range N.m | Range lbf.ft | Range lbf.in | Square Drive Ratchet | Adaptor mm | Length mm | Length in | Weight kg | Weight lb |
| ETW 25 | 020800 | 2.8-28.3 | 2.10-20.8 | 25-250 | 1/4" | 9 x 12 | 410 | 16.1 | 0.895 | 1.97 |
| ETW 100 | 020820 | 10.7-101.7 | 7.55-75 | 90-900 | 3/8" | 9 x 12 | 415 | 16.3 | 0.995 | 2.19 |
| ETW 250 | 020840 | 25-250 | 18.5-184.5 | 221-2200 | 3/8" | 14 x 18 | 495 | 19.5 | 1.195 | 2.63 |
• Modern microprocessor-controlled MEMORY electronic torque wrenches
• 3 model range covering torque values from 2.8 N.m to 250 N.m
• Memory capacity in excess of 1300 readings - date and time stamped. Recorded readings can be retrieved on the wrench or downloaded via an RS232C interface.
• Software and cable supplied with every wrench to enable easy downloading to an IBM compatible P.C. for statistical analysis or achieving.
• Direct, preset and memory modes
• Supplied with removable, reversible suare drive ratchet head
DTW Digital Electronic Torque Wrenches
| Model | Ordering Code | Range N.m | Range lbf.ft | Range lbf.in | Square Drive Ratchet | Adaptor mm | Length mm | Length in | Weight kg | Weight lb |
| DTW 50 | 020900 | 5-50 | 3.6-36.9 | 44-443 | 3/84" | 9 x 12 | 355 | 13.99 | 0.67 | 1.47 |
| DTW 50 RT | 020910 | 5-50 | 3.6-36.9 | 44-443 | 3/8" | 9 x 12 | 355 | 13.99 | 0.84 | 1.85 |
| DTW 135 | 020920 | 13.5-135 | 9.9-99.9 | 119-1194 | 3/8" | 9 X 12 | 452 | 17.8 | 0.75 | 1.65 |
| DTW 135 RT | 020930 | 13.5-135 | 9.9-99.9 | 119-1194 | 3/8" | 9 X 12 | 452 | 17.8 | 0.93 | 2.05 |
• New NON-MEMORY version of the ETW Torque
Wrenches
• All modes supplied with removable, revarsible 3/8" ratchet
head
• 4 models covering range from 5.0 to 135 N.m
• RT Models are
supplied with RS232C interface and cable for real time downloading of
single data readings.
ETW and DETS Display and Controls
1. LCD Display. Indication of preset and achieved torque + date and hour
2. Audible/optical alarm system
3. Power on / clear memory
4. Unit selection n.m, lbf.ft, lbf.in etc.
5. Mode selection
6. Count Key
7. Enter and confirm.
